Tucson Auto Repair

Arguably a vehicle’s most important safety system is its brakes. Specific components, including brake pads, shoes, rotors, drums and brake fluid are maintenance items that need regular replacement. A pulsation or shaking during braking can be a strong indication that the brake rotors are warped from excessive heat caused by extended or hard braking.  It is important to change brake fluid every 20,000 miles or 2 years. As brake fluid ages, it begins to corrode parts such as brake lines, calipers, caliper pistons, and wheel cylinders. It can cause the ABS light to come on and will ultimately lead to reduced braking performance. It is not uncommon for the braking system hardware to move, become dislodged or even break. In Very basic terms the hardware is what holds the brake pads or shoes in place. This is very common on vehicles with drum brakes, but still happens on disc brakes.  Modern braking systems are more complicated than the old ones, they include sensors, compu ... read more

Your vehicle's cooling system serves a few very important functions. It maintains the engines optimal operating temperature which is where it works most efficiently, and removes any excess heat from the engine when its under a load or outside temperatures are high.  While your vehicle is in use, the coolant exits from the bottom of the radiator after it's cooled, where its then drawn into the water pump, to cycle it back through the engine where it absorbs the heat and travels back to the top of the radiator where the cycle continues.  A vehicles cooling system is basically made up of the engine, radiator, the water pump, cooling fan(s), circulatory hoses, and a thermostat and coolant temperature sensor.  During the engine combustion process (intake,compression,power,exhaust) the fuel energy is converted into heat, which is transferred throughout the cylinder head and block to the coolant, and cycled through the cooling system via the water pump. The hose carr ... read more

The importance of CV axle boot maintenance is greatly underrated. The CV (Continuously Variable) axles on modern vehicles have multi directional joints that are protected form the elements by flexible rubber boots. Over time and due to weathering, which is a huge factor in Arizona, the rubber breaks down and cracks open, exposing the inner components and allowing contamination of the joints/bearings with water, dirt and many other things. This can become a safety hazard over time as the CV axles become dry and can seize up or even come apart. This is very dangerous if it happens when you are driving. The CV axles connect the transmission to the drive wheels. It is very important to have a regular inspection of your vehicle,  by a reputable shop such as One Stop Automotive.  You would not believe how often we see compromised CV axles on vehicles because the owners have not been notified of their condition or importance.  We can help you keep your vehicle in tip top con ... read more